Paint protection film is a high performance, self-adhesive, clear-coated aliphatic polyurethane film designed to protect automotive paint, and other surfaces, from harmful effects of stone chips and abrasion. The film is designed to resist staining and offers superior environmental resistance and gloss retention. The clear coat employs special elastomeric polymers that allow scratches in the surface to “heal” over time, eliminating the need for frequent polishing to maintain a just installed appearance.

Our warranty program covers up to 12 years of guaranteed protection against yellowing, discoloration, cracking, peeling, and hazing.

The clear coat is the self-healing layer and is approximately 13 microns thick. If that layer is penetrated, the film will not heal.

While you can wax the film, be sure the product you are using doesn’t contain Naphtha or Kerosene in concentrations over 5%, and also avoid waxes that contain dyes.

Yes. The process is the same as with regular paint: wet the surface with a lubricant such as soapy water and then gently rub the surface with the clay bar.

Paint protection film is 8 mils (.008 inches) thick.

Yes, pressure washers can be used on paint protection films, provided the film has completely dried after installation (typically 48 hours) and provided the high-pressure water is not pointed directly at the edges of the film.

Yes. PPF can be applied over a vinyl wrap or graphics. However, if there are any hard edges that film must cross (as in the case of stripes), it could result in some air being trapped along that edge.